Conflex Automatic L-Bar Sealer

The E-250 Automatic L-Bar Sealer is engineered for efficiency with logic and precision. As product is fed onto the conveyor, electric eyes measure and advance it to the centerfolded film and sealing area. To prevent the next package from entering during the sealing cycle, the belt advance is temporarily deactivated. When the sealing jaw opens, the advance is reactivated and the wrapped product is discharged into the shrink tunnel. It's logical. It's precise. It's efficient.

For more information read the Conflex® E-250 Automatic L-Bar Sealer brochure.

• Hot tooled steel knife sealing system eliminates wire replacement
• Lower heated seal pads for fast, reliable seals
• Fully automatic package length adjustments via horizontal or vertical electric eyes
• Film selvage winder
• Adjustable height legs and casters
• Film cradle with power unwind
• Hand wheel for product height adjust
• Perforator wheels for air evacuation
• Film miser/Film support bar

• Product is transferred by conveyor belt - no pusher
• Top mounted control panel for easy access
• Seals most films - polyolefin, PVC and polyethylene
• Smooth product transfer allows wrapping of non-rigid product
• Fully automatic operation requires little or no operator assistance

• Pneumatic hole punch
• Conveyor soft start
• Product staging
• Wide band seal system for polyethylene film
• Product stop separator
• Print registration
• Anti-stat system
• Film centerfolder

• Variable speed w/soft start
• Multi-pack pusher/accumulator
• High speed kit
• Custom infeeds
• Closing conveyor for small products

Back to top

The E-250A Automatic L-Bar Sealer is engineered for flexibility with logic and precision. As product is fed onto the conveyor, electric eyes measure and advance it to the centerfolded film and into the sealing cycle. To prevent the next package from entering during the sealing area, the belt advance is temporarily deactivated. When the sealing jaw opens, the advance is reactivated and the wrapped product is discharged into the shrink tunnel. It's logical. It's precise. It's flexible.

For more information read the Conflex® E-250A Automatic L-Bar Sealer brochure.

• PLC touch pad w/recipe capabilities
• Tooled steel hot knife sealing system eliminates wire replacement
• Fully automatic package length adjustment via horizontal or vertical electric eyes
• Film selvage winder
• Adjustable height legs and casters
• Waist level film cradle with power unwind
• Perforator wheels for air evacuation
• Film miser/Film support bar
• Variable speed conveyors w/soft start
• Adjustable center seal and stroke
• Film speed up to 100Fpm

• Product is transferred by conveyor belt - no pusher
• Seals most films - polyolefin, PVC and polyetheylene
• Smooth product transfer allows wrapping of non-rigid products
• Fully automatic operation requires little or no operator assistance
• Extended exit conveyor for smooth product discharge

• Scrap break detect system
• Pneumatic hole punch
• Wide band seal system for polyethylene film
• Print registration
• Anti-stat system
• Film centerfolder
• Cassette/CD hopper
• Custom infeeds
• Lower heated seal pad
• Closing conveyor

Back to top

The E-260A Automatic L-Bar Sealer is engineered for flexibility with logic and precision. As product is fed onto the conveyor, electric eyes measure and advance it to the centerfolded film and vertical posi-action sealing area. To prevent the next package from entering during the sealing cycle, the belt advance is temporarily deactivated. When the sealing jaw opens, the advance is reactivated and the wrapped product is discharged into the shrink tunnel. It's logical. It's precise. It's flexible.

For more information read the Conflex® E-260A Automatic L-Bar Sealer brochure.

• PLC touch pad
• Tooled steel hot knife sealing system eliminates wire replacement
• Fully automatic package length adjustment via horizontal or vertical electric eyes
• Film selvage winder
• Adjustable height legs and casters
• Waist level film cradle with power unwind
• Vertical posi-action seal head
• Peforator wheels for air evacuation
• Film miser/Film support bar
• Variable speed conveyors w/soft start
• Adjustable center seal and stroke
• Speeds to 85 fpm

• Scrap break detect system
• Pneumatic hole punch
• Wide band seal system for polyethylene film
• Print registration
• Anti-stat system
• Film centerfolder
• Cassette/CD hopper
• Custom infeeds
• Closing conveyor for small product transfer

• Product is transferred by conveyor belt - no pusher
• Seals most films - polyolefin, PVC and polyetheylene
• Smooth product transfer allows wrapping of non-rigid products
• Fully automatic operation requires little or no operator assistance
• Extended exit conveyor for smooth product discharge

Back to top